5182 h111 Aluminum Plate Sheet
Tensile Strength: 300 - 380 MPa Deep Drawing Performance: Good
5182 H111 is a non-heat treatable aluminum alloy with a good combination of formability and strength. 5182 H111 aluminum plate has high corrosion resistance and is very suitable for tank truck materials.
Table of Contents- 5182 h111 Aluminum Plate Features
- Mechanical Properties of 5182 H111 Aluminum Alloy
- 5182 h111 Aluminum Plate Applications
- 5182 h111 Aluminum Plate vs 5182 h19 Aluminum Plate
- Precautions for Purchasing 5182 h111 Aluminum Plate
5182 is an aluminum alloy consisting mainly of aluminum, magnesium, and manganese. It belongs to the 5xxx series of aluminum alloys, known for its excellent corrosion resistance and medium to high strength.
The alloy composition of 5182 typically consists of approximately 95.8% aluminum, 0.5% magnesium, and 0.20-0.50% manganese, with trace amounts of other elements.
The "H111" temper designation indicates that the aluminum alloy has been strain hardened. H111 is a stress relieved temper, which means the material has been partially annealed to relieve internal stresses and improve its machinability while maintaining considerable strength.
5182-H111 Aluminum is 5182 Aluminum in H111 condition. To achieve this state, the metal is strain-hardened below the strength allowed by H11 (1/8 hardness).
The 5182 H111 aluminum alloy has good strength, weldability, and corrosion resistance, making it suitable for a variety of applications in industries such as automotive, transportation, and packaging. It has good atmospheric corrosion resistance and seawater corrosion resistance and is also suitable for marine environments.
5182 H111 aluminum plate or plate refers to alloy 5182 in the H111 temper, which is a strain hardened and partially annealed temper.
5182 h111 Aluminum Plate Features
It's important to note that the choice of temper for 5182 aluminum depends on the specific requirements of your application.
- If high strength is a priority, you may opt for a harder temper like H32 or H34.
- If formability is more critical, then 5182 H111 is an advantageous choice.
- The unique advantages of 5182 H111 make it particularly well-suited for applications where deep drawing and complex shaping are required without sacrificing durability and corrosion resistance.
5182 H111 and other temper aluminum plates (such as H12, H14, H16, H18, H32, H34, etc.) are different in terms of their mechanical and physical properties due to the varying tempering processes they undergo. Here are some unique advantages of 5182 H111 aluminum plates compared to other tempered aluminum plates of the same alloy:
1. Enhanced Strength and Durability
5182 H111 is in the annealed condition, which means it has been subjected to a softening process that improves its formability and ductility. This temper is less strong compared to some other tempers, but it offers better formability, making it suitable for deep drawing and complex forming processes.
2. Excellent Formability
The H111 temper provides excellent formability, making it an ideal choice for applications that require intricate shapes and deep drawings, such as automotive body panels, fuel tanks, and kitchenware. It can be easily bent, stretched, and formed without cracking or tearing.
3. Reduced Risk of Cracking
Unlike harder tempers, which may be more prone to cracking during forming processes, 5182 H111 has a reduced risk of cracking, which can improve manufacturing efficiency and reduce material waste.
4. Good Weldability
5182 H111 aluminum plates maintain good weldability, similar to other temper conditions of 5182 aluminum. This is important in applications where joining multiple pieces of aluminum is necessary.
5. Corrosion Resistance
The corrosion resistance of 5182 H111 is comparable to other temper conditions of 5182 aluminum. It offers excellent resistance to atmospheric corrosion, making it suitable for outdoor and marine applications.
6. Machinability
While not as hard as some other tempers, 5182 H111 still offers reasonable machinability, allowing it to be cut, drilled, and machined relatively easily.
Mechanical Properties of 5182 H111 Aluminum Alloy
Mechanical Property | Typical Value Range |
---|---|
Tensile Strength | 300-380 MPa |
Yield Strength | 200-280 MPa |
Elongation | 10%-20% |
Bending Strength | 220-270 MPa |
Shear Strength | 200-240 MPa |
Impact Toughness | Good |
5182 h111 Aluminum Plate Applications
- Automobile industry: used for automobile body panels, structural parts, and other components requiring strength and corrosion resistance.
- Transportation industry: suitable for the manufacture of tanks, trailers, and other transportation-related components.
- Marine Industry: For marine applications such as hulls, decks, and other structural components exposed to harsh marine environments.
- Construction Industry: Used in construction applications including roofing, siding, and building components.
- General sheet metal processing: For a variety of sheet metal processing projects that require strength, corrosion resistance, and formability.
Q: What are the advantages of 5182 h111 aluminum plates for tank trucks?
A :
- Excellent Corrosion Resistance: 5182 aluminum plate has excellent corrosion resistance, which can effectively resist corrosion and oxidation that may occur when in contact with fuel oil and chemicals.
- Lightweight and High Strength: The 5182 aluminum plate has a lower density, compared with other materials, it can provide a lighter weight for tank trucks, while still having sufficient strength and rigidity.
- Excellent Welding Performance: The 5182 aluminum plate has good weldability, which can be easily welded and assembled, making the manufacturing process more convenient and efficient.
- High-quality Surface and Appearance: The 5182 aluminum plate produced has a flat and smooth surface without obvious defects, which makes the appearance of the tanker more beautiful, and also helps to improve the adhesion and protection performance of the coating.
- Renewability: Aluminum is a recyclable material. Oil tank trucks made of 5182 aluminum plates can be recycled and reused after the end of their service life, which contributes to environmental protection and sustainable development.
5182 h111 Aluminum Plate vs 5182 h19 Aluminum Plate
5182 H111 Aluminum Plate
- Temper: H111 (partially annealed) tempered.
- Mechanical properties: moderate strength, improved corrosion resistance, good formability. The tensile strength is usually between 300 and 380 MPa, and the yield strength is between 200 and 280 MPa.
5182 H19 Aluminum Plate
- Temper: H19 (fully hardened) tempered.
- Mechanical Properties: Higher strength and hardness compared to H111. Specifically designed for applications requiring high strength and stiffness. Formability may be reduced compared to H111.
Compare the two:
- Strength: The 5182 H19 aluminum plate has higher strength than the 5182 H111 aluminum plate.
- Hardness: The 5182 H19 aluminum plate is harder than the 5182 H111 aluminum plate.
- Formability: 5182 H111 aluminum sheet has better formability compared to 5182 H19 which may have reduced formability due to its fully hardened state.
- Corrosion Resistance: Both tempering conditions of 5182 aluminum alloy have good corrosion resistance.
The choice between 5182 H111 and 5182 H19 depends on the specific requirements of your application.
- If higher strength and stiffness are your priority, and formability is less important, 5182 H19 may be suitable.
- If you need a balance of strength, formability, and corrosion resistance, 5182 H111 may be a better choice.
It is recommended to consult the aluminum sheet supplier or manufacturer to determine the tempering temperature best suited to your specific application needs.
Precautions for Purchasing 5182 h111 Aluminum Plate
Purchasing a 5182 H111 aluminum plate or any other aluminum product requires careful consideration to ensure you are getting the right material for your specific needs. The following are some things you should pay attention to when purchasing a 5182 H111 aluminum plate:
1. Check Material Certification
Request material certification, such as a Factory Test Report (MTR), to verify 5182 aluminum alloy composition, mechanical properties, and any specific quality standards. This is critical, especially for critical applications.
2. Tolerance of 5182 H111 Aluminum Plate
Pay attention to production tolerances on thickness, width, and length to ensure they fit your project needs.
3. Communicate the Surface Finish of the 5182 H111 Aluminum Plate
If surface finish is important to your application, discuss whether you require a specific treatment such as sanding, anodizing, or painting. Make sure you can provide the required finish.
Inquire about delivery time:
4. Request 5182 H111 Aluminum Plate Samples
If possible, please request a sample or samples of the 5182 H111 aluminum plate to check its quality and suitability for your application.
5. Consider 5182 H111 Aluminum Plate Packaging and Transportation
Communicate packaging options and shipping methods to prevent damage during shipping. Proper packaging is critical to protecting 5182H111 aluminum sheets.
6. Ensure Compliance with Regulations
Ensure that the 5182 H111 aluminum plate meets any regulatory requirements or standards relevant to your industry or application.
By taking these precautions, you can increase the likelihood of a successful 5182 H111 aluminum plate purchase that meets your project requirements and quality standards.
-
5182 Aluminum Plate Sheet
5182 aluminum plate, which is a deformed alloy with good corrosion resistance, good weldability, corrosion resistance, medium strength and cold working properties.
-
5182 h19 Aluminum Plate Sheet
5182 H19 is a non-heat treatable aluminum alloy with excellent corrosion resistance and ductility, good formability and strength. 5182 aluminum plate is suitable for gas welding, argon arc welding, spot welding, seam welding and other welding, and its welding performance is very good.
-
5182 o Aluminum Plate Sheet
5182 O aluminum plate is used for car doors, fenders, and engine hoods. It has good stamping effect, corrosion resistance, good formability, and high safety factor.
-
5182 Aluminum Plate for Tanker
Specifically designed for tankers, our 5182 aluminum plate offers excellent corrosion resistance and high strength for reliable leak and splash protection.
-
Aluminum Plate for Tanker Body
Tanker Body complies with various regulations, standards, and certifications related to safety, structural integrity, leak prevention, and cargo handling.
-
5182 Automotive Aluminum Plate Sheet
5182 Automotive Aluminum Plate Sheet has a flat shape, high quality, good corrosion resistance, good weight reduction, and energy-saving effects, and its safety and comfort are better provided.
-
Automotive Aluminum Plate for Car Door
The stamping effect of the Haomei Aluminum 5182 alloy aluminum plate is good, and the customer feedback is that the aluminum plate has no cracks after stamping.
People also searched for Aluminum Plate
-
5454 Aluminum Plate Sheet
The strength of 5454 antirust aluminum is about 20% higher than that of 5052, and its characteristics are roughly the same as that of 5154, but its corrosion resistance is better than that of 5154 in severe environments.
-
5A06 Aluminum Plate Sheet
The magnesium content of 5A06 aluminum plate is higher than other 5 series alloys, with the highest magnesium content. It is a non-heat-treatable alloy with high strength and plasticity.
-
5754 Aluminum Plate Sheet
The strength of 5754 aluminum is higher than that of 5251. 5754 aluminum plate is a high-strength non-heat-treatable alloy and has excellent corrosion resistance, good processability, and weldability.
-
5086 Aluminum Plate Sheet
5086 aluminum is not strengthened by heat treatment, but rather becomes stronger by strain hardening or cold machining of the material. 5086 aluminum sheet is commonly used in marine, cryogenic, pipeline, military, chemical and gas/oil/petroleum applications.
-
5005 Aluminum Plate Sheet
5005 aluminum is a medium-strength aluminum alloy with a small amount of magnesium as the main alloying element. It has good formability and is often used in applications requiring anodized surface treatments.
-
5052 Aluminum Plate Sheet
5052 aluminum plate is mainly composed of magnesium and chromium. It has good processability, medium static strength, high fatigue strength, and good weldability. The fatigue strength of 5052 aluminum alloy is higher than most aluminum alloys.
-
5083 Aluminum Plate Sheet
5083 aluminum plate is a non-heat treatable alloy with high strength and corrosion resistance. We offer a wide range of sizes, thicknesses, and specifications at affordable prices to meet customer-specific needs.